Home/Powder coating
Durable
powder coating.
Hard-wearing, corrosion-resistant finishes for gates, frames, components, enclosures and structural steel, including large-format items up to 5 m long. Prepped, coated and oven-cured in our own facility, in your choice of colour and finish.
to last.
Why powder coat
Tougher
than paint.
Powder is applied electrostatically and then cured in an oven, where it flows into a hard, continuous coat. The result resists chipping, scratching, fading and corrosion far better than a conventional wet paint finish.
Because we sandblast and coat under one roof, surfaces are properly prepared before the powder goes on, and preparation is the biggest factor in how long a coating lasts.
- Chip & scratch resistant
- Corrosion protection
- Even, consistent colour
- Items up to 5 m long
Large-format coating
Up to 5 m
in one piece.
Our 5 metre curing oven lets us coat long and oversized items in a single piece, so there's no need to cut sections down or join them after coating.
Large items get the same care as small parts: sandblasted where needed, evenly coated and fully cured for a consistent colour and finish along the whole length.
- Items up to 5 m long
- Full-length gates & panels
- Beams, columns & frames
- Long balustrades & handrails
long.
What we coat
Built for
everyday wear.
From a single gate to repeat production runs, we coat steel items for homeowners, contractors, plants and manufacturers.
Gates & fencing
Driveway gates, security gates and full-length palisade panels up to 5 m.
Balustrades & handrails
Smooth, even finishes for balustrades, railings and staircases.
Frames & structural steel
Beams, columns, frames and supports up to 5 m long, protected against corrosion.
Brackets & components
Brackets, plates and laser-cut parts coated in batch quantities.
Enclosures & cabinets
Enclosures, covers and panels with a clean, durable finish.
Plant & mining parts
Guards, covers and replacement parts for plant and equipment.
Colours & finishes
Pick your
finish.
Choose the sheen that suits the job, then pick a colour. Not sure what will work best? Tell us where the item will be used and we'll advise.
Gates, fencing and architectural steel. Hides minor surface marks.
Balustrades, furniture and enclosures
Equipment, signage and feature pieces. Easy to wipe clean.
Outdoor and high-touch items where marks need to stay hidden
Choose a colour
Our most requested colours are below. Need something else? Send us the RAL code or a sample and we'll confirm availability.
One supplier
From raw steel
to finished part.
Your items don't need to travel between suppliers. We can cut, fabricate and blast them in the same facility before they go into the coating booth.
How it works
Raw in.
Finished out.
Send your details
Upload photos or drawings with sizes, quantity, colour and finish, or drop your items off.
Receive your quote
We check the items and send a clear, detailed quotation with lead time.
Prep, coat & cure
Items are cleaned or sandblasted, powder coated and cured in the oven.
Collect your order
Finished items are quality-checked and ready for collection.
Get a quote
Tell us
what to coat.
Upload photos or drawings, or enter the size of your items. Choose a colour and finish, and our team will come back to you with a detailed quotation.
- Upload up to 5 photos or drawings, or enter sizes
- Large-format items up to 5 m long welcome
- Pick a colour, finish and quantity
- Add sandblasting or fabrication in the same request
Mon – Sat, 7am – 5pm. Drop-offs and consultations until 2pm.
Recent work
Coated to last.
A look inside our coating line and some recently finished items.
FAQ
Powder coating
questions.
Can't find your answer? Call us on +27 76 622 0599 or email sales@milcon.co.za.
What is powder coating?
A dry powder is sprayed onto the metal with an electrostatic charge and then cured in an oven. It melts and bonds into a hard, even coat that is more durable than conventional paint.
Can you coat items that are painted or rusted?
Yes. Old paint, coatings and rust are removed by sandblasting first, so the new coat bonds to clean steel. Let us know the condition of your items when you request a quote.
Which colours can I choose?
Our popular colours are shown on this page, in matt, satin, gloss and textured finishes. For other colours, send us the RAL code or a sample and we'll confirm availability.
How big an item can you coat?
Our curing oven is 5 metres long, so we can coat large-format items like full-length gates, palisade panels, beams and frames in one piece. Send us the length, width and height of your largest item and we'll confirm it fits.
How long does powder coating take?
Lead time depends on preparation, quantity and colour. We confirm the lead time on your quotation.
Can I drop off items for a quote?
Yes. Drop-offs and consultations are welcome Monday to Saturday until 2pm.
Need it coated?
Let's quote it.
Send us photos, drawings or sizes and our team will come back to you with a detailed quotation. Drop-offs and consultations are welcome until 2pm, Monday to Saturday.
Experts in laser cutting, custom metal fabrication, sandblasting and precision powder coating — delivering high-quality steel gates, structural components and corrosion-resistant finishes for residential, commercial and industrial clients.
Useful Links
Get in Touch
- +27 76 622 0599
- sales@milcon.co.za
- Mon – Sat: 7am – 5pm
- Drop-offs & consults until 2pm